Application Instructions for MX1, MX2, MX3, MX4, G3, G5, RZ1 & RZ2 | Go to Instructions for MS-1 & MS-2
Use skates to REPLACE original / stock mouse feet.
Please read conditions of use here first.
1. Remove stock(original) mouse feet and clean empty mouse feet sockets with alcohol swab
Clean surface contact between your mouse and the skates is needed for best adhesion.
2. Let alcohol dry or wipe dry with clean tissue or cloth
After doing this, the mouse feet surface should be free from any dust, dirt or glue and ready to be applied with the skates.
3. Peel off paper backing from skates *DO NOT touch the exposed sticky side*
Each skate comes with a paper liner on one side which must be removed to expose the adhesive. Place a piece of sticky tape on this paper liner and peel it off to remove the liner and expose the adhesive.
Click image to view larger version
4. Place skates accurately on mouse feet
It is essential that you stick the skates only one time as this ensures good adhering. The adhesive will lose strength if you pull the skates off the feet after sticking.
5.Apply firm pressure to skates for 30 seconds to create a lasting bond